One-piece 2’ x 2’ Black Birch sprung floor panel with square edges and rounded corners, finished with our durable Tap+ Urethane. Includes handle on back for easy portability. The tap and Irish dance floor with zero set-up time. The sound quality and resilience are top-notch. You’ll hear every nuance on this board.
For ease and quick portability, this floorboard is not designed to connect with any others. This tap board is not designed to connect with any other floor panels. If you’re looking for a floor that can expand, check out our 4′ x 4′ Maple Tap + Irish Floor.
- Floor Size: 23.5″ x 23.5″
- Has attached carrying handles
Made in the USA
- Pre-finished with our durable Tap + Irish Urethane for the ideal slip-resistant finish, that’s easy to clean.
- Wood sourced locally, harvested with renewable forestry practices.
- Floor manufactured in Flint, Michigan
**PLEASE NOTE: Our floors are not designed for outdoor use.
Keep the floor surface dry. Clean up spills immediately, before they cause damage. Wipe the floor regularly with a water-dampened towel to keep clean. For deep cleaning, use a clean towel dampened with a 1:4 solution of Simple Green All-Purpose Cleaner to water. CAUTION: Do not allow cleaning solution or water to seep between the seams of the floor.
Always check tap shoes for loose screws prior to stepping on this wood surface.
After tapping, expect denting, scratches and black dust to form without any reduction in the shock absorption properties or performance of your floor. Embrace the character that you put into your tap floor as a sign of progress, consistency and hard work. Check our Instagram for photos of our floors in action: @omarafloors
DAILY TAP FLOOR CLEANING:
Clean surface of tap floor, one (1) panel at a time, with a Mr. Clean Magic Eraser. 1. Wet the Magic Eraser with clean water. Squeeze out excess water. Wipe the Magic Eraser back and forth from one edge to the next edge, moving across surface of panel until clean. Do not let water seep into seam between panels. Check cleanliness of Magic Eraser after each panel. When Magic Eraser is dirty rinse in clean water, squeeze out excess water and continue. 2. Wipe panel dry with paper towels. Wipe the surface and sides with paper towel to dry and remove any residue. How to clean Magic Eraser: Rinse Magic Eraser with clean water in sink or bucket until clean. Squeeze out excess water. CAUTION: Do not allow cleaning solution or water to seep between the seams of the floor.