The 4′ x 4′ Maple Tap Floor is the floor chosen by most professional tap dancers. This two-piece practice floor comes in two 2’x4’ panels. Use as a full 4′ x 4′ floor for yourself, or split in half to share with a friend ~ a 2′ x 4′ section for each of you. The floor includes a clamp and cable set to hold the panels together, an installation tool, and instructions. Perfect for tap, ballet, fitness, and hard shoe highland.
Floor Size: 47.5″ x 47.5″ Panel Dimensions: (2) panels are each 47.5″ x 23.75″
**The Floor includes a clamp and cable set to hold the panels together, an installation tool, and instructions.
**PLEASE NOTE: Our floors are not designed for outdoor use.
Keep the floor surface dry. Clean up spills immediately, before they cause damage. Wipe the floor regularly with a water-dampened towel to keep clean. For deep cleaning, use a clean towel dampened with a 1:4 solution of Simple Green All-Purpose Cleaner to water. CAUTION: Do not allow cleaning solution or water to seep between the seams of the floor.
Always check tap shoes for loose screws prior to stepping on this wood surface.
DAILY TAP FLOOR CLEANING:
Clean surface of tap floor, one (1) panel at a time, with a Mr. Clean Magic Eraser. 1. Wet the Magic Eraser with clean water. Squeeze out excess water. Wipe the Magic Eraser back and forth from one edge to the next edge, moving across surface of panel until clean. Do not let water seep into seam between panels. Check cleanliness of Magic Eraser after each panel. When Magic Eraser is dirty rinse in clean water, squeeze out excess water and continue. 2. Wipe panel dry with paper towels. Wipe the surface and sides with paper towel to dry and remove any residue. How to clean Magic Eraser: Rinse Magic Eraser with clean water in sink or bucket until clean. Squeeze out excess water. CAUTION: Do not allow cleaning solution or water to seep between the seams of the floor.