Installation Videos
Fast & Efficient Sprung Floor Assembly
Getting your new floors in is as simple as 1-2-3! Every O’Mara Sprung Floor arrives with clear instructions, assembly equipment and any specialty tools you will need for installation. Our 4′ x 4′ to 4′ x 8′ floors are well-packaged in cardboard boxes and come with a pre-tensioned assembly cable for simple setup. Floors 8′ x 8′ and larger arrive in a custom-made wooden crate and include a specialty toolkit to make your installation as smooth as possible.
Receive and unpack your O'Mara Sprung Floor.
Easily assemble your personal sprung floor with the help of a few simple tools or take on your large floor installation with the help of our installation instructions and comprehensive toolkit.
Enjoy the happy feeling that comes from stepping on your new O'Mara Sprung Floor. Experience increased energy, happier joints and the knowing that you've made the best investment for your body.
4' x 8' Practice Floor Assembly
Assembling our 4′ x 8′ sprung dance practice floor takes only minutes.
Every 4′ x 4′ to 4′ x 8′ practice floor from O’Mara Sprung Floors comes with a pre-tensioned assembly cable to make setup simple. Our 4′ x 4′, 4′ x 6′ and 4′ x 8′ practice floors all follow the same assembly process shown here.
These floors ship via UPS and arrive in well-packaged, heavy-duty cardboard boxes sealed with our iconic O’Mara Sprung Floors tape.
8' x 8' Practice Floor Assembly
Our 8′ x 8′ sprung dance practice floor assembly process is simple, with every detail accounted for.
This video shows how to open the shipping crate, assemble the 8′ x 8′ sprung floor and install the optional transition ramps.
Your 8′ x 8′ sprung dance floor will arrive in a heavy-duty wooden crate that we build specifically to safely ship your floor to you. These floors ship via freight and include residential liftgate service, which means the crate will be lowered from the truck for you but the delivery driver will not bring the crate into to your garage or house. You must be home to accept delivery. You are responsible for opening the crate and moving the floor panels into your home.
Studio Floor Detailed Install
Learn the need-to-know basics for installing your full room sprung dance floor plus a few tips to make your first experience go smoothly.
Watching this highly detailed video will help you install your first O’Mara Sprung Floor with ease. Installing the first row is the most time-consuming and most important part of installing an O’Mara Sprung Floor. If you are patient with this part and make sure everything is properly aligned, you will find the rest of installation goes much quicker. Your O’Mara Sprung Floor will arrive with complete, detailed installation instructions and a comprehensive toolkit. Every panel is labeled and you will also receive a floor print that shows you exactly where each panel goes.
When you receive your sprung floor, we highly recommend you fully read the included instruction manual before removing the sprung floor panels from the crate. For your first installation, it’s best to watch this video and read the written instructions a couple times before you begin. Once your floor is on-site, if you have any specific questions our help is only a phone call away. We are happy to support you in your floor installation process. Notify us prior to installation if you will need support on weekends or after 5 pm Eastern time.
Your sprung dance floor will arrive in heavy-duty wooden crates that we build specifically to safely ship your floor to you. These floors ship via freight and include liftgate service, which means the crate will be lowered from the truck for you but the delivery driver will not bring the crate into to your building. You must be on-site to accept delivery. You are responsible for opening the crate and moving the floor panels into your building.
Install Middle Row Studio Floor
How to install a middle row and make sure it is in place properly before beginning the next row.
Studio Floor Installation Timelapse
40′ x 24′ floor with ramps on three sides and trim on the downstage mirror wall.
Connector Plate Assembly
Connector plates are used when our standard clamp and cable assembly does not work for a particular panel, usually one that is too small or oddly located.
Request an Estimate
