The StreetLine Travel Board is a folding sprung tap floor with attached carrying handles designed for travel, especially by air! This Sprung Birch board comes pre-finished with our StreetLine Urethane. Foam blocks adhered to the underside of our resilient wood panels absorb landing forces and return energy, protecting your body and extending your career. The sound quality and resilience are top-notch. You’ll hear every nuance on this board.
**EXCEPTION** This floor is not designed for hoofers, tap dancers practicing advanced steps, or Irish dancers wearing shoes with metal taps. If you wear metal taps on your shoes and dance heavily on your floor, please purchase a ProLine Maple Floor. If your tap repertoire includes: shuffle riffs, digs, shiggy bops/shovels, flam, you will dent a Birch floor very quickly. Please choose our more durable ProLine Maple Floor.
The O’Mara Sprung Floors StreetLine Travel Board is a 28″ x 22″ Birch Sprung Floor that comes pre-finished with our durable StreetLine urethane. This floor can be folded in half and stored almost anywhere. It has attached handles and travels easily. The dimensions when folded are 22″ x 14″, complying with most airline carry-on regulations. Our pre-finished surface is easy to clean between uses with a solution of Simple Green and water.
- Open size: 28″ x 22″
- Folds to: 14″ x 22″
- Has attached carrying handles
Made in the USA
- Wood sourced locally, harvested with renewable forestry practices.
- Floor manufactured in Flint, Michigan
This tap board is not designed to connect with any other floor panels. If you’re looking for a floor that can expand, check out our 4′ x 4′ Golden Maple 3200 Floor. It’s recommended for travel practice, home practice, and it folds into a compliant airplane carry-on
**Please note: Although we are seeing people use these floors out of doors, they are not designed for outdoor use.
Always check tap shoes for loose screws prior to stepping on this wood surface.
DAILY TAP FLOOR CLEANING:
Clean surface of tap floor, one (1) panel at a time, with a Mr. Clean Magic Eraser. 1. Wet the Magic Eraser with clean water. Squeeze out excess water. Wipe the Magic Eraser back and forth from one edge to the next edge, moving across surface of panel until clean. Do not let water seep into seam between panels. Check cleanliness of Magic Eraser after each panel. When Magic Eraser is dirty rinse in clean water, squeeze out excess water and continue. 2. Wipe panel dry with paper towels. Wipe the surface and sides with paper towel to dry and remove any residue. How to clean Magic Eraser: Rinse Magic Eraser with clean water in sink or bucket until clean. Squeeze out excess water. CAUTION: Do not allow cleaning solution or water to seep between the seams of the floor.